你好。
Hello.

在本教程中，我们将学习一些逻辑指令。
In this tutorial, we will learn a bit logic instructions.

位逻辑是什么？
What is the bit logic?

好的。
OK.

在小图中，我们有常开或常闭触点。
We have, in the little diagram, normally open or normal close contacts.

我们也有或没有联系。
And also we have or or not contacts.

我们还提供了每种接触类型的上升沿和下降沿。
And also we have the rising edge and also falling each contact types.

但它们是什么？
But what are they?

此外，我们还有线圈，还有设定的和最近的说明。
Also, we have the coil and also we have the set and recent instructions.

首先，我们先从接触者的感染情况开始。
Firstly, let's start with the and infections with the contacts.

LTE 意味着很多。
LTE means lot.

很多东西不是常开触点。
Lot what not normally open contact.

例如，常开触点不是 M0。
Normal open contact is, for example, M0 not.

我们现在没有物理输出，但它可以是，例如，零。
We have not a physical output now, but it can be, for example, zero.

好的，这是你的物理输入，但我将从内部规则开始，使其模拟。
OK, this is your physical input, but I will start with the internal rules to make it simulated.

所以这是正常的公开接触法律。
So this is a normal open contact with law.

此时我们也可以使用 now 和 逻辑，M0 和 D 是 0 和 1 和非和非，例如 M2。
And also at this point we can using now and logic, what is that M0 and D one zero and and one and not and not, for example, M2.

好的。
OK.

在这里我们还可以使用像 或 M3 这样的交互。
And also here we can use our interaction like or M3.

但第八个位置是不正确的。
But eighth position is not correct.

正因为如此，我在这里才会这样写或者M3。
Because of this, I will write here like this or M3.

所以M3连接到这里。
So M3 is connected to here.

你会看到它。
You will see it.

现在发生了什么事？
Now what's happened?

M0 或 M3 和 1，而不是 M2 和出。
M0 or M3 and and one and not M2 and out.

为什么为零？
Why zero?

这是第一件事，这里LDP的意思就是一次脉冲。
This is the first thing, and here LDP means just one pulse.

它将被激活，然后它将被激活。
It will be active and then it will be this activated.

这对你的 M4 有何好处？
How this right your M4.

这是 M4 可以始终接通，我们可以使其接通，但由于上升的 h 触点类型，四分之一始终处于接通或处于接通状态。
This is M4 can be always on and we can make it on, but one in four is always on or on condition because of the rising h contact type.

它只会激活它，或者它会允许功率流到右侧。
It will just activate it, or it will allow the power flow to the right side.

只有一个脉冲。
Just one pulse.

好的，我们还有 l 和 f 的意思。
OK, and we have also l the f means.

五年后就会有一次。
One in five years on.

它不会允许两个强大的、强大的人离开右侧。
It is not going to allow two powerful, powerful off to the right side.

五分之一的人处于两种关闭状态。
One in five is on two off condition.

它只会向右侧输出一个脉冲。
It will just give one pulse output to the right side.

好的。
OK.

10 说，我就用这里。
And I will just use here, said 10.

好的，现在我们已经说过了，也。
OK, now we already said and also.

当五个处于两个关闭状态时，我将重置，好的。
With and five is on two off condition I will reset and that, OK.

我们使用了线圈，我们使用了所说的起义，我们使用了赤褐色的起义，我们使用了和。
And we used a coil, we used said insurrection, we used russet insurrection we used and.

逻辑类型与也或。
Logic type and also or.

在这里我们也可以说，例如，在上午 2 点，我可以在这里写。
And also here we can say, for example, on AM two, I can write here.

嗯，让我们说或者我的意思是。
Um, let's say or I means.

这是正确的。
That's right.

七或八表示正常的条款或条件。
And seven or eight means normal clause or condition.

好吧，就这样。
OK, like that.

我们能做的，我们可以测试一下，这是位逻辑，这是非常基本的。
And what we can do, we can just test once this is the bit logic, and this is the really basic.

此外，这是策略编程的基础知识，M0 将处于活动状态，或者条目将处于活动状态，而 1 将处于活动状态，而不是处于或不处于状态。
Also, this is the basics of the policy programming and M0 will be active or entry will be active and one will be active and not in or not.

七。
Seven.

然后我们就有了输出。
Then we have an output.

M4将被激活。
M4 is going to be active.

只需一个脉冲就能向右侧产生强大的移动。
Just one pulse will give a powerful move to the right side.

我们只需向右侧发出一个脉冲激活，右侧就会变得活跃并感觉活跃。
We'll just give one pulse activation to the right side and in turn will be active and feel active.

但这不会被重新讨论，其中五个将处于两个关闭状态，这将重置 M10。
But this is not going to be revisited and five will be on two off condition that will reset M10.

好的，首先，我们需要转换这个项目，我会说“好的”。
OK, and firstly, we need to convert this project and I will say OK.

现在我可以进入模拟器了。
And now I can go to Simulator.

它正在写入策略，然后就关闭了。
It is writing to the policy, and it's closed then.

我们准备好了。
We are ready.

好的。
OK.

安东尼·罗素重新安置，因为你们两个会说规则集指令是蓝色的，让我们激活并归零，我将注册整个和。
Anthony Russo resettled because of two of you will say the ruleset instruction is in the blue and let's just activate and zero and I will register this whole and to.

清洗一号和二号窗户。
Wash window one and two.

七个，好吧。
And seven, OK.

还有两三个？
And two or three?

让我们将其设为零，零处于活动状态，而一将被激活。
Let's make it a zero and zero is active and one is going to be activated.

我们有输出或者根本没有输出。
We have an output or not at all.

而且，在此处和条件之后，如果 M7 为真，我们有两个或条件。
And also and after that here and condition, we have two or condition if M7 is true.

好吧，我们仍然有一个输出，并且还有两个输出，那么在那一刻您将看到，因为这个，这两个或 A。
OK, still, we have an output and also and two will be on then that moment you will see because of this, these two or A.

按照这两人的说法，是无条件的。
According to these two of them is unconditional.

那么就没有输出，但我会让 M2 就是其中的一个，如果 和 1 是，我们就有一个输出。
Then there there's no output, but I will make M2 is of that and we have an output if and one is.

错误的。
False.

不。
No.

好的。
OK.

或者MTV可以激活它并瞄准零，我们可以让它为零。
Or MTV can activate it and aim zero, we can make it zero.

好的。
OK on.

我们希望让我们继续努力，继续努力。
And we want let's make it on, on on and.

这里它是关闭的，那么这就是我们有输出的正确结果。
Here it is off, then this is the correct that we have an output.

让我们将四个窗口设为活动状态，并在此处观察窗口一和窗口四，然后注册窗口二和窗口五以观察窗口一和窗口四。
Let's make em four active and watch one here and four and let's register two and five to watch window one and four.

现在把焦点集中到这里，好吗？
Now Focus two here, OK?

只需一个脉冲，四个脉冲就会打开。
Just one pulse and four will be on.

好的。
OK.

四仍然是真的。
And four is still true.

你会看到它。
You will see it.

M10 是时时设定的，现在也是如此。
And M10 is set now and then is true now.

如果我把它设为 false，现在 4 为 false，但 M10 仍然打开，那么这意味着只有一次通过。
And if I make it false and four is false now, but M10 still is on, then what is that means just one pass.

这是激活的，它允许将强力传递到右侧，并且设置为 M10。
This is activated and it allowed to pass powerful over to the right side and it is set at M10.

但LPF意味着年龄的下降。
But LPF means falling age.

触点类型在打开状态时会重置M10，但仍然是关闭状态。
Contact type will reset M10 when this is on to of condition, but this is still off condition.

我们来看看一和五是假的。
Let's take a look for one and five is false.

这样就可以了
This make it on.

但这不是真的，不是吗？
But it is not true, is it?

好的。
OK.

但如果五分之一的时间变成了真假，我现在赞扬的那种情况，而且就在过去，这种情况还很活跃，那么这就是俄罗斯的尝试。
But if in five becomes true to false, that condition I am praising now and just one past this was active, then it is Russia's attempt.

这是位逻辑基础知识。
This is the bit logic basics.

好的，如果您遇到任何问题，可以直接问我问题。
OK, if you're stuck at any point here, you can ask me a question directly.

我们已经学习了如何使用 LDP 和冻结边缘以及下降 h 2？
We already learned how can we use an LDP and a frozen edge and also falling h two?

你也可以问我，这只是暂停的一种方式吗？
And you can ask me also, is this just only one way to give one pause?

不。
No.

我们可以使用另一个指令，但是暂时，因为这是一个有点逻辑的教程，对于我们本教程来说已经足够了，我在这里完成了。
There is another instructions that we can use, but for a moment, because of this is a bit logic tutorial, it is enough for us for this tutorial, I am finished here.

我们下个教程见。
See you in the next tutorial.